Self-aligning roller bearings with its carrying capacity, high vibration performance, and can compensate for processing, installation and the deformation caused by axial concentricity error, and is widely used in iron and steel, paper, shipping, power, engineering machinery industries such as steel converter, continuous casting machinery, paper machinery, upgrading machinery, reducer, vibrating screen, crusher and other mechanical devices. Bearing Manufacturing Co., Ltd. Dalian BEST reversed in recent years, Spherical Roller Bearing continuous research and optimization, self-aligning roller bearing design and processing technology has been the rapid development of the imported bearings BEST alternative (CC-type retainer structure) SKF exactly the same appearance and, CC-type self-aligning roller bearings in rolling diameter, number and length of the increase in dynamic load rating also has been significantly enhanced.    CC-type self-aligning roller bearings in the C-type self-aligning roller bearings on the basis of improvement, its structure is characterized by symmetrical drum-type roller, activities, Circlips, roller from the guide, the inner without the large, small ribs, steel stamping cage. CC-type structure not only the length of roller bearings, rated load increased, but also the limits of high speed and low friction loss, compared with C-life increased by about twice. <br>   Self-aligning roller bearings with steel stamping 2000CC-type cage, which is an improved version of 2000C model, improved roller and the rings reduce friction between the carrying capacity increase.

Self-aligning roller bearings 2000CACM-type vehicle system entities using brass cage. It is equipped with a symmetric spherical roller, inner ring with a fixed small wall and activities Circlips. The main technical parameters of such a bearing with the corresponding models of 2000CC-type the same.